BAIO Multi Effects Pedal

SKU: 16100442
eko

£0.00

The BAIO (Box All In One) by Eko Guitars is a complete portable multi-effects pedal, perfect for your guitar. With its 9 built-in preamp types, 8 IRs and integrated effects, you will be able to fully control your sound. Try it as an audio interface with your pc or smartphone and use the BT to play along with your backing tracks.

Featuring 16cm in length, just 6cm in width and 260g in weight, BAIO is the all-in-one multi-effect system capable of offering all the features and functions essential to the modern guitarist. Easy to carry and super resistant thanks to its metal chassis, it allows total control of your sound.

EKO BAIO MULTI-EFFECT PEDAL WITH INTEGRATED IR OVERVIEW

With nine selectable preamp types, controllable with the Tone and Drive knobs, you will have access to just as many timbres ranging from crystal clear to heavier distortions. The Modulation section, accessible via the Mod knob, allows you to add Chorus and Phaser; Delay effect with relative management of Delay Time, feedback, Mix and Reverb effect are accessible respectively with the Delay, FB, Mix and Rev knobs. The IR knob allows you to select from eight Impulse Responses specifically created for BAIO by Massimo Varini, who has selected and adapted some of the best ChopTones IRs. From Blues to Metal you will have the opportunity to use live and in the studio a selection of amplifiers, cabinets, speakers and microphones specially combined to offer a realistic convincing sound. Through the Out control you will be able to adjust the Output Volume and using the three footswitches you can switch from Preset Mode – for changing the Presets – to Live Mode, where you could set IRs / Rev, Delay / Mod and Preamp separately. With the footswitches, you can also activate the Bluetooth that will allow you to play your favorite backing tracks through an external device or activate the integrated Tuner, with which it is also possible to completely interrupt the Output signal (Mute function).

EKO BAIO MULTI-EFFECT PEDAL WITH INTEGRATED IR CONNECTIONS

The rear panel features two standard jack sockets for input and output, an ON/OFF switch, a USB port for powering the pedal and charging the battery and a computer connection for use BAIO as an audio interface. Through the Phone input, you can connect your smartphone to the pedal using the supplied cable and use BAIO as an audio interface on your smartphone as well. There is also a Headphone output that will allow you to listen to the instrument signal and any Bluetooth playback at the same time.

MAIN FEATURES

9 preamp types with Tone and Gain control
8 IRs (Impulse Response) for as many amplifiers, selected and adapted to the BAIO by Massimo Varini and made by ChopTones
2 Modulation Effects (Chorus & Phase Shift)
1 Reverb Effect
1 adjustable Delay (Tape) – Mix, Delay Time, and Feedback
Live / Preset function (3 storable presets)
Built-in Tuner with Mute function

ADDITIONAL FUNCTIONS

Built-in rechargeable batteries, USB charging, designed to simultaneously perform and recharge
BAIO operates as an audio interface when connected to a computer via USB
BAIO works as an audio interface when connected to a smartphone
Bluetooth function (input) allows you to play backing tracks from any BT device

EKO BAIO MULTI-EFFECT PEDAL WITH INTEGRATED IR

Attribute Value
Input: 1/4" Standard TS (Mono) Jack
Output: 1/4" Standard TS (Mono) Jack
Sample Rate: 48kHz
Bit Depth: 24 bit
Battery Capacity: 600 mAh
Battery life: 6h of continuous use (approximately)
Dimensions: 162mm Length, 61mm Width, 23mm Depth
Weight: 260g